1.Direction - up
2.Direction - Right
3.Direction - Down
4.Direction - Left
5.State indicator light / Confirmr
6.Intercom
7.Photo-shooting


1.Direction - up
2.Direction - Right
3.Direction - Down
4.Direction - Left
5.State indicator light / Confirmr
6.Intercom
7.Photo-shooting
8.Charging port
1 . Bling Remote Controller connection
a. To save electricity,Bling Remote Controller is in sleep mode when not in use and must be activated when any key is pressed(Once activated it will not fall asleep again).

b. Find and click "BlingRemote" on the Device page to enter Device Binding page.Place the phone near the device to connect.


2 . Instruction of state indicator light charging


a. Charging
Remove the USB water-proof block, and use the Micro USB cable to connect chargers with safety certificate marks (like 3C or UL, etc.). During charging, the indicator light would cycle flash every four seconds and would stop once the charging is done.

b. Under connection
Under standby state, press any button would quick flash the state indicator light, indicating that it's connecting. When the connection is completed, the indicator light would stay on and when it fails to connect, it enters connection waiting state.

c. Connection waiting
Under standby state, press any button for 3 seconds and if there's no "Livall Riding" APP for connection, the indicator light would cycle flash every 2 seconds, indicating the connection waiting state, and if there's still no connection for 30 seconds, it'll return to standby state.

d. Connection completed
The indicator light would stay on when the connection is completed, until it enters standby state.