BH51
1.Button " □ "
2.Button " - "
3.Button " + "
4.Microphone
5.Bluetooth Speaker
6.Charging port


BH60SE
1.Button " □ "
2.Button " - "
3.Button " + "
4.Microphone
5.Bluetooth Speaker
6.Charging port

1 . Helmet connection
a. Turn on the helmet: Press the power button under the cap of helmet until you hear "Power on".


b. Find and click "BlingHelmet" on the Device page to enter Device Binding page.Place the phone near the device to connect.


2 . Operating Instructions


a. Start up
Long press " □ " for 2s till you hear the "start up" sounds,meanwhile the outline light and tail light will flash twice in orange.

b. Power off
When the device is in a state of working, long press "□" till you hear the "power off" sounds, meanwhile the outline light and tail light would flash once in orange.

c. Connecting to Bluetooth earphone
When the device is power off, long press "□" till you hear the "matching" sounds, means the devices starts matching;scan the device with your phone which the Bluetooth is available. And click it to connect when spotting the equipment of "Helmetphone", "Helmet headset", "BH60", "BH100". The speakers on both sides will make the noise of "matching completed" when the connection is completed. The bluetooth will be connected automatically next time.

d. Answer and hang up calls
When there's an incoming call, the device would give out notification voice, press "□" to answer the call and long press for 1s to reject;during calls, press "□" to hang up.

e. Redial calls
When the device is powered, quick press "□" twice to dial the last number.

f. Music Player
When the device is powered, press "□" to play music(need to open the music player APP in your phone before this operation). Long press "-" to play the previous song and "+" the next song.

g. Volume adjustment
During music playing or talking calls, press "+" to increase volume while "-" to decrease.

h. Notification voice switches of Bluetooth speaker
The default setting is English. When the product is powered, first hold "-" and then press "+" to cycle switch languages, from English --> Chinese --> French -->Spanish; when the language is selected,loose "-".

i. Charging
Use the USB cable to connect the USB port beneath the tail light to the charger with USB (DC 5V) port. When it's connected, the two indicator lights in the middle of the tail light would flash red (no such indicator under noemal standby state) and green when the charging is done. The electricity of the charger is suggested to be > 1A and the charging time about 3.5h.

j. Factory Reset